Precision Rack 1000 Series Product Page
23U steel frame rack for securely mounting standard 19" RETMA systems and components. Capacity : 2 Density™ Series Systems and 2 External Storage Systems.
| Dimensions (External) |
Height - 50.5" (128.4 cm) Depth - 31.8" (80.77 cm) Width - 26.9" (68.33 cm) |  |
| Dimensions (Internal Useable) |
Height - 40.25" (102.24 cm) 23U RETMA | |
| Weight | Empty approximately 135lbs. | |
| Cooling | Two 550 CFM fans mounted on top of rack | |
| Shipping Dimensions | Height - 56" (142.24cm) Depth - 34" (86.36cm) Width - 34" (86.36cm) | |
| Shipping Weight | 246lbs. |
PR1000 uses two 120Volt, 12Amp AC power cords. Each power cord is protected by a 12Amp circuit breaker inside the cabinet. This means that a customer can install equipment that will use only 12 Amps of current or less. Two fully-loaded Density chassis can be mounted in the bottom of the PR1000 and third-party rackmount equipment (not to exceed 4 Amps) can be mounted in the top space of the cabinet.
| AC Input | 2 distribution circuits 12A ~120V x 2 |  |
| Wiring | 3 Independent 3-wire service (Line, Neutral, Earth) |
|
| Fans | ~120V | |
| Internal Power Outlets | North America : NEMA 5-15p to 1EL-320C13 SJT, 13A/125V, 3x AWG16 | |
| NOTE: Upper 7U space is limited to power support for up to two devices for a total of 4 Amps. | ||