Instructions for flashing the system BIOS on the 733X Blade Server:
1.Extract the contents of this ZIP file to a folder on your drive.
2. Copy the file windrvr.sys to WINNT\system32\drivers (WIN2000\system32\drivers)
3.Open a DOS command prompt, change to the folder where this ZIP was extracted, and execute the GO batch file.
4.You will be prompted to press any key to flash or control-c to quit.
5.When flash is completed (this takes about a minute), shutdown Windows using the Restart option.
6.When prompted during POST, Press <DEL> to enter the CMOS setup.
7.Once in CMOS setup, Press <F9> and Select OK then press <ENTER> to load Optimal BIOS Defaults.
8.Press <F10> and select OK then press <ENTER> to save changes and exit. The blade will reset.
