Instructions for flashing the system BIOS on the 714X Blade Server:
1.Make sure JP4 has the jumper shunt installed on pins 1 and 2.
2.Extract the contents of this ZIP file to a DOS bootable Floppy.
3.Boot from flash diskette. At the prompt type GO and press <ENTER>  
4.You will be prompted to press any key to flash or control-c to quit.
5.When flash is completed (this takes about a minute), eject the floppy or CD-ROM, and reset.
6.Press <DEL> to enter the CMOS setup.
7.Press <F9> and Select OK then press <ENTER> to load Optimal BIOS Defaults.
8.Press <F10> and select OK then press <ENTER> to save changes and exit. The blade will reset.
